Accessibility Tools

  • Content scaling 100%
  • Font size 100%
  • Line height 100%
  • Letter spacing 100%
 x 
Cart - $ 0.00

Cart

Your cart is currently empty

 x 
Cart - $ 0.00

Cart

Your cart is currently empty

4x4
GM,Holden,Isuzu
ISUZ-56
Suitable For
Type:

D-Max

Model:
TFS40 (Mid 2020 on)
Variant:
0"-2" Lift
Detail:
WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Coil Spring
Shock Absorber
Part Number
GS21-470

X - Centre of Eye to Spring Seat


X - Centre of Eye to Spring Seat


Bump Stop

Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.


Strut Top Cap
Part Number
SC59-002
Leaf Spring
Shock Absorber

Suits Standard Springs Only

Part Number
GS43-801
Part Number
IMS21-50471

Fit Only With Raised Springs

Part Number
GS43-081B

WA21-584K Must Be Fitted With These Shock Absorbers


Part Number
IMS43-50081B

Must Be Fitted With GS43-081B, IMS43-50081B & MRA43-A081B

WA21-584K Must Be Fitted With These Shock Absorbers


Spring & Shackle Bush Kit
U-Bolt Kit
Shackle Kit
Part Number
SK21-065
Shackle Pin
Part Number
SP59-060
Brakeline Extension
 
Part Number
WA21-584K

Must Be Fitted With GS43-081B, IMS43-50081B & MRA43-A081B