Accessibility Tools

Skip to main content
 x 
Cart - $ 0.00
Cart

Your cart is currently empty

4x4

Toyota

TOY-88
Suitable For
A vehicle image representing the page's contents
Type:

Landcruiser

Model:

80 Series (05/1990 to 11/2007), 105 Series (08/1991 to 11/2007)

Variant:

80 / 105 Series - 4" Lift - (FZJ, HZJ, HDJ 80/105)

Detail:

Wagon, 
100mm (4”) Lift

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only

Coil Spring

Part Number
C59-308

Availability

R
Part Number
C59-312

Availability

R

Shock Absorber

Part Number
GS45-912

Availability

R
Part Number
IMS45-60912

Availability

R
Part Number
MRA45-A912

Availability

R

Shock Absorber Reservoir Mounting

Part Number
RM59-030

Availability

R

Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength


Steering Damper

Part Number
SD59-824

Availability

R
Part Number
SS59A824

Availability

R

Bump Stop

Hydraulic Bump Stop

Replaces OEM Inner Coil Bump Stops For Smoother Bottom Out And Reduced Bucking

Height Adjustable - Can Be Used As Bump Stop Extension Kit

Part Number
HBS56-009

Availability

R
Part Number
HBS56-006

Availability

R

Hydraulic Bump Stop Mounting

 
Part Number
HBS59-012FK

Availability

R

Radius Arm Bush

Raising Vehicle Will Effect Castor Angle. A Wheel Alignment is Recommended to Determine if a Castor Kit is Required.

Radius Arm Bush

Part Number
RB59-536K

Availability

R
 
Part Number
RB59-534K

Availability

R

Castor Plate Kit

Part Number
WA59-514K

Availability

R

Panhard Rod

Sway Bar Extension

 
Part Number
SE59-516

Availability

R

Coil Spacer

Part Number
PS59-4001

Availability

R
Part Number
PS59-4002

Availability

R
Part Number
PS59-4003

Availability

R
Part Number
PS59-4004

Availability

R

Under Body Bush Kit

SEE REAR UNDER BODY BUSH KIT

Coil Spring

Shock Absorber

Part Number
GS59-687

Availability

R
Part Number
IMS59-60687

Availability

R
Part Number
MRA59-A687

Availability

R

Bump Stop

Hydraulic Bump Stop

Replaces OEM Inner Coil Bump Stops For Smoother Bottom Out And Reduced Bucking

Height Adjustable - Can Be Used As Bump Stop Extension Kit

May Require Extra Bump Stop Extensions For Rubber Outer Bump Stops

Part Number
HBS56-009

Availability

R
Part Number
HBS56-006

Availability

R

Hydraulic Bump Stop Mounting

 
Part Number
HBS59-019FK

Availability

R

Control Arm

Upper Control Arm

 
Part Number
WA59-545K

Availability

R

Lower Control Arm

Brake Adjuster

Part Number
BA45-005

Availability

R

Panhard Rod

 
Part Number
PR59-1405

Availability

R

Alignment Part

* Check Sway Bar Link Configuration - 80 Series Require Either SE59-517 or SE59-519.
All 105 Series Require SE59-519

 
Part Number
SE59-517

Availability

R
 
Part Number
SE59-519

Availability

R

Coil Spacer

Part Number
PS59-4005

Availability

R
Part Number
PS59-4006

Availability

R
Part Number
PS59-4007

Availability

R

Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes