Toyota
Landcruiser Prado
150 Series (2010 on)
KDJ150, GRJ150, KDJ155 (3" Lift)
SWB & LWB Wagon,
Does Not Suit Models with Self-Levelling Suspension
75mm Lift (3")
New product is added into quote successfully.
Coil Spring
SWB & LWB Petrol
Without KDSS
75mm Lift When Fitted With IMS59-50700C & MRA59-A700B Shock Absorbers
85mm Lift When Fitted With IMS59-50700C & MRA59-A700B Shock Absorbers
SWB & LWB Diesel
Without KDSS
75mm Lift When Fitted With IMS59-50700C & MRA59-A700B Shock Absorbers
75mm Lift When Fitted With IMS59-50700C & MRA59-A700B Shock Absorbers
Shock Absorber
X - Centre of Eye to Spring Seat
X - Centre of Eye to Spring Seat
Bump Stop
Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.
Control Arm
Upper Control Arm
Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment
Strut Top Cap
Strut Spacer
Maximum 1 Per Shock.
Requires Diff Drop Kit If Fitting To IMS or MRA Shock Absorbers
Diff Drop Kit
Must Fit When Using Long Travel Shock Absorbers GS59-574 To Prevent C.V. Bind
Sway Bar Relocation
Coil Spring
Shock Absorber
IMS59-50575 & MRA59-50575 Suit Only Variable Rate Coils & Require Bump Stop Extension
GS59-575 is a Long Travel Shock Absorber
Requires Bump Stop Extensions To Stop Shock Absorber Bottom Out
IMS59-50575 is a Long Travel Shock Absorber
Requires Bump Stop Extensions To Stop Shock Absorber Bottom Out
MRA59-A575 is a Long Travel Shock Absorber
Requires Bump Stop Extensions To Stop Shock Absorber Bottom Out
Shock Absorber Reservoir Mounting
Only For Use With MR59-50701 Or MR59-50705
Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength
Bump Stop
Hydraulic Bump Stop
Replaces OEM Inner Coil Bump Stops For Smoother Bottom Out And Reduced Bucking
Height Adjustable - Can Be Used As Bump Stop Extension Kit
Hydraulic Bump Stop Mounting
Control Arm
Designed For More Articulation
Upper Control Arm
Lower Control Arm