Accessibility Tools

  • Content scaling 100%
  • Font size 100%
  • Line height 100%
  • Letter spacing 100%
 x 
Cart - $ 0.00

Cart

Your cart is currently empty

 x 
Cart - $ 0.00

Cart

Your cart is currently empty

4x4
Toyota
TOY-114
Suitable For
Type:

Landcruiser

Model:
80 Series (05/1990 to 11/2007), 105 Series (08/1991 to 11/2007)
Variant:
80 / 105 Series - 6" Lift - (FZJ, HZJ, HDJ 80/105)
Detail:

Wagon, 
150mm (6” Lift)

WARNING - 75MM (3”) OR HIGHER LIFT
The suspension components listed on this page are for off-road use only.
Refer to Local Laws before Fitting to Registered/Road Vehicles
An Engineering Certificate may be required
Handling Characteristics will Diminish on Lifts Above 50mm (2”)
The following modifications (but not limited to) need to be made to the vehicle before the kit is fitted.
Adjustable Panhard Rods
Modified Leading / Trailing Arms
Brake Hoses
Extended Bump Stops
Gear Box & Drive Line Modifications
Steering Arms
Swaybar Modification
Dobinsons Spring & Suspension do not accept any responsibility for injury caused to person or property through the use of the products listed on this page.
These products do not come with any warranty or guarantee.
Coil Springs: Sold in Pairs. Torsion Bars: Sold in Pairs. Prices are subject to change without notice. *Raised Height Measurements are Listed as a Guide Only
Coil Spring
Shock Absorber
Part Number
GS59-684
Part Number
IMS59-60684
Part Number
MR59-60684
Shock Absorber Reservoir Mounting
Part Number
RM59-030

Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength


Steering Damper
Bump Stop

Hydraulic Bump Stop

Replaces OEM Inner Coil Bump Stops For Smoother Bottom Out And Reduced Bucking

Height Adjustable - Can Be Used As Bump Stop Extension Kit

Hydraulic Bump Stop Mounting

Radius Arm Bush
Castor Plate Kit
Part Number
WA59-514K
Panhard Rod
Sway Bar Extension
Coil Spacer
Part Number
PS59-4001
Part Number
PS59-4002
Part Number
PS59-4003
Part Number
PS59-4004
Coil Spring
Shock Absorber
Part Number
GS59-685
Part Number
IMS59-60685
Part Number
MR59-60685
Bump Stop

Hydraulic Bump Stop

Replaces OEM Inner Coil Bump Stops For Smoother Bottom Out And Reduced Bucking

Height Adjustable - Can Be Used As Bump Stop Extension Kit

May Require Extra Bump Stop Extensions For Rubber Outer Bump Stops

Hydraulic Bump Stop Mounting

Control Arm

Upper Control Arm

Lower Control Arm

Brake Adjuster
Panhard Rod
 
Part Number
PR59-1405
Alignment Part

* Check Sway Bar Link Configuration - 80 Series Require Either SE59‑517 or SE59‑519.
All 105 Series Require SE59‑519

Coil Spacer
Part Number
PS59-4005
Part Number
PS59-4006
Part Number
PS59-4007
Under Body Bush Kit

Kit Includes Front & Rear Under Body Bushes