Toyota
Landcruiser Prado
150 Series (2010 on)
KDJ150, GRJ150, KDJ155 (0"-2" Lift)
SWB & LWB Wagon,
Does Not Suit Models with Self-Levelling Suspension
New product is added into quote successfully.
Coil Spring
SWB & LWB Petrol
Without KDSS
SWB & LWB Diesel
Without KDSS
SWB & LWB
With KDSS
Shock Absorber
X - Centre of Eye to Spring Seat
X - Centre of Eye to Spring Seat
Bump Stop
Replaces Original Bump Stop.
If Exceeding Listed Spring Seat Heights This MUST Be Used To Prevent Coil Bind.
Control Arm
Upper Control Arm
Must Fit When Raising Vehicle Above 50mm To Allow For Improved Caster Angle Alignment
Strut Top Cap
Strut Spacer
Maximum 1 Per Shock.
Requires Diff Drop Kit If Fitting To IMS or MRA Shock Absorbers
Diff Drop Kit
Must Fit When Raising Vehicle Above 50mm
Sway Bar Relocation
Coil Spring
SWB
Without KDSS
LWB
Without KDSS
SWB & LWB
With KDSS
Coil Conversion
Adds Additional 15mm To Listed Lift Heights.
Requires Coil Springs & Shock Absorbers.
Shock Absorber
Shock Absorber Reservoir Mounting
Only For Use With MR59-50701 Or MR59-50705
Recommended For Optimal Remote Reservoir Fitment, Positioning & Strength
Bump Stop
Hydraulic Bump Stop
Hydraulic Bump Stop Mounting
Control Arm
Designed For More Articulation
Upper Control Arm
Lower Control Arm